Register Helpfull RO Service Indore or RO Installation Request

Troubleshoot Home Services for RO Water Purifier Maintenance (Before Calling Customer Care):

1. Check Water Supply and Pressure:
   • Ensure the water inlet valve is fully open.
   • Verify there’s no blockage in the water supply line.
   • Check if the water pressure is adequate (low pressure can affect purification).
2. Inspect Filters and Membranes:
   • Regularly clean or replace pre-filters, post-filters, and sediment filters.
   • Check for clogging or discoloration in the RO membrane.
   • Follow the manufacturer’s recommended filter replacement schedule.
3. Examine for Leakages:
   • Inspect all tubing and connections for cracks or loose fittings.
   • Tighten any loose connections and replace damaged parts if necessary.
   • Ensure the O-rings and seals are intact and properly fitted.
4. Monitor Tank and Purification Process:
   • Check the storage tank for proper water levels and pressure.
   • If the tank is not filling, inspect the shut-off valve and float mechanism.
   • Test the TDS (Total Dissolved Solids) level to ensure the RO system is functioning effectively.

5. Check for Unusual Noises:
   • If the purifier is making strange noises, inspect the pump for any issues.
   • Ensure the motor is functioning properly and not overloaded.
   • Clean or replace the pump if it’s clogged or damaged.
6. Inspect the Power Supply:
   • Ensure the purifier is properly plugged in and receiving power.
   • Check for tripped circuit breakers or blown fuses.
   • Verify the voltage matches the purifier’s requirements.
7. Clean the UV Chamber (if applicable):
   • If your RO system has a UV purification stage, clean the UV chamber regularly.
   • Ensure the UV lamp is functioning and replace it if it’s not emitting light.
8. Flush the System:
   • Periodically flush the RO membrane to remove accumulated impurities.
   • Follow the manufacturer’s instructions for manual flushing.
9. Check for Airlocks:
   • If water flow is restricted, there may be air trapped in the system.
   • Turn off the purifier, open the faucet, and let the air escape before restarting.
10. Monitor Water Taste and Odor:
    • If the water tastes or smells unusual, check the carbon filters for saturation.
    • Replace the activated carbon filters if they are exhausted.
11. Inspect the Drain Line:
    • Ensure the drain line is not clogged or kinked.
    • Clean the drain line to allow proper wastewater flow.
12. Reset the System (if applicable):
    • Some RO purifiers have a reset button or function. Use it if the system stops working unexpectedly.
    • Refer to the user manual for reset instructions.

By addressing these additional troubleshooting steps, customers can ensure their RO water purifier operates efficiently and avoid unnecessary service calls